Professional Voice Recorder
Easy operation- One button recording, One button playing.
Turn on / turn off：
● Turn on the recorder
1. Push the power button to "ON" position. The screen will be lightening, the recorder is turned on.
2. At standby condition, press "Play/Stop" for 3 seconds. The recorder is turned on.
● Turn off the recorder
1. Push the power button to "OFF" position. The screen will be off and the recorder is turned off.
2. Press "Play/Stop" button at standby condition, the screen shows “Bye Bye!” and the recorder is turned off.
3. The recorder will be turned off automatically on set time.
One button Recording
Press “REC” button at any standby condition to start recording, repress it to stop and save the recording.
Press “Play / Stop” button to pause the recording, press it again to continue the recording. Press “REC” button to stop and save the recording data.
After recording for full 3 hours, the recorder will automatically start a new file to continue recording.
Recording Mode Menu
Press the “REC” to stop the recording. Before playing the recording, press the “Mode” button to enter the menu. Press the “Forward” and “Back forward” to select the menu settings.
Long press power button about 2 seconds, the device will turn on and boot into standby state after vibrate a time (the indicator light becomes red and always bright).
Long press power button again to turn off the device, it will vibrate twice and the red light is extinguished.
|-1||Music Mode||-7||Current File Total Time|
|-2||Audio Type||-8||File Waveform|
|-3||Current File Numbers||-9||Music status|
|-4||Total File Numbers||-10||Volume|
|-5||Current Playing Time||-11||Music|
Channel slider indicator
Unable to turn on. No display
The battery has not enough power.
Please recharge battery.
Unable to record
The battery has no power. The memory is full
Please recharge. Please delete part files.
Unable to play
Recording time less than one second. The files were damaged.
Ensure the recording effective. Delete the damaged files.
No sound from loudspeaker
The battery level is low. The earphone is connected. The volume is low.
Please recharge the battery. Plug out the earphone. Adjust the volume.
No sound from earphone
Earphone is unconnected. The volume is low.
Please re-insert the earphone. Adjust the volume.
Size: 93mm * 31mm * 14mm Weigh
Polymer battery 3.7 V 380mAh
128MB ~ 4GB
Recording bit rate
LP 32Kbps/SP 64Kbps/HQ 128Kbps/SHQ 192Kbps
76.0 ~ 108MHz frequency