Wearable Voice Recorder
OLED Display screen
Long press button about two seconds the recorder will turn on.
At the power-on condition, long press button about 2 seconds the recorder will turn off.
1536Kbps PCM high fidelity recording. OLED Display screen. Recordings & Music playback. lVoice Activated Recording (VOR/VAR).
Time-setting. Built-in high fidelity speaker & high sensitive microphone. Support 24 languages.
Automatic section-break. USB data transmission & charging
One key recording: At the main menu interface,long time press "M" button to enter into the Record Mode and begin recording.
At the playback condition,press "M" button to enter into the setting,press button to choose the menu and set it: Change volume、Replay mode(A-B repeat)、Repeat(mode of cycle)、Tempo rate(playback speed). At the condition of the pause,press "M" button to enter into the "File set" menu，press button to choose and set it： Local folder、Delete file、 Delete all. Please press "M" button to enter into the above menus,then press button to choose and set the parameters then press "M" button to back to the main menu.
Long press power button about 2 seconds, the device will turn on and boot into standby state after vibrate a time (the indicator light becomes red and always bright).
Long press power button again to turn off the device, it will vibrate twice and the red light is extinguished.
After turn on the recorder,the main menu will be displayed as below：
At the main menu,please press the button to choose the Record Mode and then press the "M"button to start recording, Repress the "M" button to stop recording and save the recording files.The display screen will shows as below during recording.
At the main menu,please press button to choose the Voice Mode,press "M" button to enter into it,and then press button to start playing.The display screen will shows as below during playing.
The device uses the polymer battery for power supply.When connect it to the PC,it can works as the removable disk and start charging automatically .It will spends about 1-2 hours to charge it,after full of power it will stop charging automatically.When it’s charged fully, it can continue recording about 23 hours at the recording bit rate of 32Kbps, about 20 hours at the recording bit rate of 192Kbps,about 18 hours at the recording bit rate of 512Kbps,about 9 hours at the recording bit rate of 1536Kbps. After finish the charging,please remove the usb device safely by click the usb device icon at the right bottom of the desktop ,then disconnect the recorder with the PC.
In order to avoiding accidents, please read user's manual carefully before operations.
1. Please don't put the recorder at the place which in the high temperature、damp or dust situation.
2. Please handle the recorder with the care,avoiding strong collision or fall.
3. Please backup files regularly on the computer to avoid data loss which may be caused by wrong operations or breakdown of the machine.
4. We are not responsible for the recording failures which caused by wrong operations or damage of the recorder.
5. When the device stop working, please use the pin or needle to press the reset hole on the back of the device,then the machine would be restored.
6. Please do not disassemble or replace the inner parts by yourself. Please backup files before sending for repair. We are not responsible for the information loss which caused by maintenance.
7. We are not responsible for the user's recording without other's approval.
8. We endeavor to ensure the manual' s integrity. For technical and other reasons. If the contents do not match , please take recorder as standard.
|Power Supply||Polymer battery 3.7V about120mAh|
|4GB Recording Time||285hours/47hours/18hours/6hours|
|8GB Recording Time||570hours/94hours/36hours/12hours|
|16GB Recording Time||1140hours/188hours/72hours/24hours|