Uc-20 Mini Digital Spy Camera

这里可以自定义设置

Hidden Camera

( Full HD 1920*1080P Video )

It's able to charge the voice recorder during taking video or recording voice.

Turn on / turn off：

Long press power button about 2 seconds, the indicator light becomes red and always bright,the recorder is turned on and boots into standby state .Again,long press power button,the red light is extinguished and the recorder is turned off .

Details Display

Science and technology bring convenience to us. We still have been paying close attention to the quality of our every product!

Multifunction

Used as Webcam, Used as Car DVR . It's able to charge the voice recorder during taking video or recording voice.

Shooting Video

Voice Recording

PCM High Fidelity Recording, Digital Noise Reduction.In standby state, double-press power button fast to start recording voice, the blue indicator light will flash three times and go out.

Time Stamp / Time Setting

3.5 hours video recording. Saving the recording files automatically when the power is running low.

Motion Detection

If there is no moving object detected during shooting the video, the recorder will stop shooting after one minute to save the storage space . The recorder will start shooting video automatically when moving object detected.

Synopsis

Science and technology bring convenience to us. We still have been paying close attention to the quality of our every product!

这里可以自定义设置

Functions Overview

❶

Full HD 1920*1080P Video.With a camera can rotate 90 degrees.

❷

PCM high fidelity recording. Motion detection video

❸

Time stamp & Time setting. Used as Webcam.

❹

Used as Webcam. Support TF card up to 32GB.

Shooting Video / Recording Voice

The recorder enters into standby state after boot on , the red indicator light always bright.

Shooting Video

In standby state,short press power button to start shooting the video ,the indicator light becomes blue and goes out after three seconds; Again, short press power button to stop shooting and save video. Then the indicator light turns red and will be always bright again while the recorder returns to standby state.

Motion Detection Video

In standby state, fast double-press power button to start recording voice after one vibration, the blue indicator light will flash three times and go out; again, fast double-press power button to stop recording and save the file after a vibration, then the red light will be always bright and boot into standby state.

Motion Detection Video Recording

If there is no moving object detected during shooting the video, the recorder will stop shooting after one minute to save the storage space .The recorder will start shooting video automatically when moving object detected.

Recording Voice

In standby state,double-press power button fast to start recording voice,the blue indicator light will flash three times and go out; Again,double-press power button fast to stop recording and save the file ,then the red light will be always bright and boot into standby state.

Attention:

In order to control the recording file’s size and insure it’s safety,the video file will be saved automatically while it’s capacity about 2GB,and the audio file will be saved automatically after two hours’ continuous recording.

Operations

Long press power button about 2 seconds, the device will turn on and boot into standby state after vibrate a time (the indicator light becomes red and always bright).

Long press power button again to turn off the device, it will vibrate twice and the red light is extinguished.

→

PC Connection

In the shutdown or standby state, connect it to PC with the USB cable . And then the removable disk could be found on PC.The video file will be saved in the folder named VIDEO,and the audio file will be saved in the folder named RECORD. Please remove the removable disk device safely by click the usb device icon at the right bottom of the desktop ,then disconnect the recorder with the PC.

2016

→

Document Setting

Please open the txt file named SET at the root of the removable disk,it shows as below: Date/Time =20160101000000; Motion 1080P =0; Off:0; On:1; TimeStamp =1; Off:0; On:1

2016

→

Time Setting

Date/Time =20160101000000，Please adjust the figure according to the local time,such as 20160101183030 (It means in Jan.1st 2016 at 18:30'30'')

2016

→

Motion Detection Setting

Motion 1080P =0, 0 or 1 is available,0 means close the motion detection function,and vice versa.

2016

→

Video Image Time Stamp

TimeStamp =1，0 or 1 is available,0 means close the time stamp on the video screen,and vice versa. After revised it, please save the documents and exit, the setting can become effective.

2016

→

Webcam

Please turn off the recorder and remove the TF card first, then connect it to the PC , the recorder can be used as a Webcam.

2016

→

Charging

Please connect it to the PC or charger with the USB cable.When the indicator becomes red and keep flashing,it means the recorder is charging.When it finishes the charge,the red indicator light will stop flashing.It will take about three hours to charging completely after the battery uses up.

Attn：The recorder can charging and recording simultaneously during taking video or recording voice ,once it connect to the PC.

这里可以自定义设置

Precautions

Please read this user’s manual carefully before first use.

The recorder does not have internal flash memory ,please insert TF card before use. ( Please use authentic memory card）Please make sure the recorder is turned off before insert the TF card.

2.If the recorder has no response to any operations while working , please press RESET hole to reboot the product.

3.Please back up the files regularly on the PC to avoid data loss which may be caused by wrong operations or breakdown of the machine.

4.We are not responsible for the audio or video file failures which caused by misuse or damage of the recorder.

5.Please do not disassemble the recorder by yourself. Please backup files before send for repair. We are not responsible for the information loss which caused by repair.

6.We are not responsible for the user’s audio or video recording without other’s approval.

7.We endeavor to ensure the manual’s integrity. For technical and other reasons if the contents do not match, please take the product as standard. We reserve the right to modify the design and specifications without prior notice.

这里可以自定义设置

Technical Specifications

Camera parameters	100W pixel, 65 degree angle
Camera format	AVI:1920*1080 resolution, 25 frames per second
Recording format	PCM 512Kbps
Power supply	Li-ion polymer battery 3.7V 480mAh
Support system	Windows xp/7/8/10
Video file size	80MB-180MB per minute
Audio file size	3.8MB per minute
TF card storage	2GB－32GB
Size	83mm * 28mm * 12mm

UC-20 Mini digital spy Camera