Produce the highest quality digital recorder products to win the trust of every customer
English
Produce the highest quality digital recorder products to win the trust of every customer
English
Wearable Voice Recorder
1024Kbps PCM High Fidelity Recording
Turn on/ Turn off/ Reset
Long press 
button about 2 seconds, the indicator light becomes red and it means the recorder is turned on. Repress the button about 2 seconds, the recorder turns off.
If there is no response when press the buttons, long press button about 15 seconds, it can reset the device.
Main Functions
❶
1024Kbps PCM High Fidelity Recording. Recordings & Music playback, FM Radio.
❷
❸
❹
USB data transmission & charging, Recording and Charging simultaneously.
Record Mode
Push the "Mode" button to position "Ⅰ", the recorder will start to record voice once it's turned on, and the blue indicator light will goes out after five times flashes.
Push the "Mode" button to position "Ⅰ", the recorder will start to record voice once it's turned on, and the blue indicator light will goes out after five times flashes. Press button during recording , the blue indicator light will flashes again. While the blue indicator light flashes, press button to pause and save the recording file.and repress button to start another recording.
Playback Mode
Push the "Mode" button to position "Ⅱ", the recorder will start to play recording files once it's turned on,and the blue indicator light will be always bright. When press the "M" button, the Recording files and Music can be switched with each other. In the playback state,press button or the "play/pause" button on drive-by-wire earphone(between"+" "-")to pause, repress to play again. In the playback state,short press"+"or"-"button on drive-by-wire earphone to adjust the volume. Long press "+"or"-"button to rewind or forward fast. In the paused state,short press"+"or"-"button on drive-by-wire earphone to switch previous and next file. In the playback state,long press the "M" button can delete the current played file, and at the same time the blue light will flashes
Operations
1024Kbps PCM high fidelity recording will make the recording to get a best effect.
2016
Charging
During the working process of the recorder,when the red indicator light twinkling means the battery is not enough,please connect the recorder to the computer to charge in time.During charging,when the red indicator light twinkling means the charging is not finished,and vice versa .When its fully charged,it can continue recording about 30 hours at the recording bit rate of 192Kbps,about 12 hours at the recording bit rate of 1024Kbps,about 4 hours at FM Radio status.
The way of Recording and Charging simultaneously:please press“M”button when the recorder connect to the computer,then the “Removable Disk”icon will disappear and then press “” to record while charging.
FM Radio
Push the“Mode”button to the position “Ⅲ”,the recorder will enter into the status of Radio once it's turned on, During the FM radio process,press the “+”or“-”button on drive-by-wire earphone to adjust the volume.
Long press“+”or“-”for automatic scanning,the recorder will automatically save the channels.Press button or the "play/pause" button on drive-by-wire earphone (between"+" "-") to shift the channel which you saved,long press "M" button to delete the current channel.
Attn：Please insert the drive-by-wire earphone into the recorder when you slide the “Mode” button to position“Ⅲ”.In order to improve the effect,please keep the drive-by-wire earphone vertically.
2016
Time-setting
Please connect the recorder to the computer and create a “txt” file in the folder named RECORD. The format and the content of the file must includes the date and time, such as 20160601103030 (It means in Jun.1st 2016 at 10:30'30''), then save it.Please make sure the “year” must be four digits and the others be two digits.After you done it, the time setting is successful.
Precautions
In order to avoid accidents, please read user's manual carefully before operations.
1. Please don’t put the recorder at the place where is in the high temperature、damp or dust situation.
2. Please handle the recorder carefully, avoiding strong collision or fall.
3. Please backup files regularly on the computer to avoid data loss which may be caused by wrong operations or breakdown of the machine.
4. We are not responsible for the recording failures which caused by wrong operations or damage of the recorder.
5. Please do not disassemble or replace the inner parts by yourself. Please backup files before sending for repair. We are not responsible for the information loss which caused by maintenance.
6. We are not responsible for the user's recording without others's approval.
7. We endeavor to ensure the manual's integrity. For technical and other reasons. if the contents do not match , please take recorder as standard.
Technical Specifications
| Size：57mm*24mm*10mm | Weight：16g |
| Power Supply | Polymer Battery 3.7V 120mAh |
| Recording Format | WAV, 192Kbps / 1024Kbps |
| 4GB Recording Time | about 47 hours/about 9hours |
| 8GB Recording Time | about 94 hours / about 18hours |
| 16GB Recording Time | about 188 hours / about 36 hours |
| Support System | Windows 2000 / XP / Vista / 7 / 8 / 10 |
We have been collecting the design,
development and production of digital
electronics on integrative since 1999.
Copyright © 2020 Shenzhen Hnsat Industrial Co., Ltd. | All Rights Reserved 
工商网监 电子标识
