◆One button voice activated recording：Long press the power button about 2 seconds,the indicator light turns to red,the recorder start voice activated recording,during the recording process,the indicator light will turn to blue and flash 5 times then disappear.
When the sound is too quiet, the recorder will enter into the VOS status and pause the recording until the outside sound is normal to be recorded.
Note：As the recorder with the function of voice activated recording, it maybe can’t recording the voice which sound is too low, in that case ,our company is not responsible for this kind of issue.
◆Stop recording：During the recording process ,short press the power button,the blue light
will keep flashing again, short press the power button again the recorder will stop recording and save the recording file.
◆Turn off：During the recording process, long press the power button about 2 seconds,the
recorder will stop recording to save the recording file,then turns off.
◆Playback：Please make sure the recorder is turn off,then connect it to PC or Android smart
Phone to playback the recording files.
◆Time setting: Please connect the recorder to the PC and create a “txt” file under the folder RECORD,then save it.(The format and the content of the file should include the date and time.).Please make sure the “year” must be four digits and the others be two digits.such as 20180117103030 (It means in Jan. 17th 2018 at 10:30'30'').
◆USB connection:In the state of the shutdown,please connect the recorder to PC or the mobile device which with the OTG function.The recorder can be used as the removable disk and start charging,when the red indicator light keep flashing ,it means the charging is not finished,and vice versa. It will need about 1 hour when charging by PC.And the recorder can continuous recording about 12 hours after fully charged
Note: If the red indicator light flashes during recording,it means the power is not enough.Please connect it to PC,phone or charger,it will be recording and charging simultaneously.